Search by topic : Shale Feedstocks
Title Author Edition
Shale gas feeds petrochemical expansion

Rene Gonzalez

2013 / Shale

North Americxan ethylene capacity is set to increase significantly with new crackers coming online after 2016, plus higher production of propylene and other derivatives
More

Driving down costs in hydrogen production

Luigi Bressan and Chris Davis, Foster Wheeler

2013 / Shale

An optimised hydrogen plant design achievs the right balance of minimising both Capex and Opex costs, while meeting the specific objectives of the end user.
More

Cracking hydrocarbon feedstock with a heavy tail

Johan Van Der Eijk, Technip

2013 / Shale

The introduction of a vapour/liquid separation step allows for the efficient removal of a heavy tail from the furnace convection section.
More

Naphtha catalytic cracking for propylene production

Christopher Dean, High Olefins FCC Technology Services

2013 / Shale

Investment in on-purpose propylene production technology based on naphtha-based feedstock is taking on various process configurations
More

Maximise ethylene gain and acetylene selective hydrogenation efficiency

Ling Xu, Wolf Spaether, Mingyong Sun, Jennifer Boyer and Michael Urbancic, Clariant

2013 / Shale

Third-generation stabilised front-end selective acetylene hydrogenation catalysts provide high selectivity, low sensitivity to CO swings and slow deactivation
More

Reducing emission treatment costs for gas processors 2013 / Shale

Regenerative thermal oxidising abatement technology is effective in amine tail gas treatment operations due to energy-efficient operation and reliability
More

Catalytic solutions for processing shale oils in the FCC

Kenneth Bryden, E Thomas Habib Jr, Olivia Topete, Rosann Schiller, Grace Catalyst Technologies

2014 / Shale

Monetising tight oils requires suppression of unconventional metals contamination and gas formation, and adherence to flexible catalyst functionality
More

Shale feedstocks fuel ethylene, LNG and petrochemical derivatives expansion

Rene G Gonzalez

2014 / Shale

In spite of the variability in shale composition causing operational challenges for refiners, monetisation opportunities are seen throughout the energy value chain
More

Shale crudes and FCC: a mismatch from heaven?

Bart De Graaf, Yali Tang, Jeff Oberlin and Paul Diddams, Johnson Matthey Process Technolgies, Intercat

2014 / Shale

Weighing the effects that the processing of shale oils has on FCC unit operation, such as iron poisoning of FCC catalysts
More

Overcoming the challenges of tight/shale oil refining

Brian Benoit and Jeffrey Zurlo, GE Water & Process Technologies

2014 / Shale

The impact of tight oil processing can have on a refinery, particularly the considerations that must be given to desalter performance, corrosion and fouling control
More

Better yeild accounting methods improve financial results

Kaylen McMullen, Joseph McMullen and John Hernandez, Schneider Electric and Invensys

2014 / Shale

A yield accounting system can improve the efficiency of solving material balance errors and corrct measurement errors throughout an entire facility
More

Improving CO2 absorber performance in LNG production

Ralph H Weiland and Nathan A Hatcher, Optimized Gas Treating Inc

2015 / Shale

Simulation of deep CO2 removal in LNG and syngas applications, combined with intercooling, maximises effectivenes of piperazine-promoted MDEA solvents
More

Light tight oil crude unit fouling root causes and troubleshooting

Gregory Savage and Kailash Sawhney, Nalco Champion

2015 / Shale

Fouling in preheaters, crude furnace and atmospheric tower bottoms exchangers directly impacts throughput and profitability, requiring rigorous evaluation strategies
More

Maximising profitability with FCC feeds from opportunity crudes

Alexis Shackleford, BASF

2015 / Shale

Case studies show how to achieve optimal monetisation value with opportunity feeds through operating strategies, innovative catalysts and technical stewardship
More

Processing shale oil in an FCC unit: catalyst and profit optimisation

Bart De Graaf, Charles Radcliffe, Martin Evans and Paul Diddams, Johnson Matthey Process Technologies

2015 / Shale

Adjustments in base catalyst, use of ZSM-5 additives and metal traps enable efficient processing of paraffinic and heavy crude in the presence of metals contaminants
More

Three steps to successful processing of shale and other opportunity feedstocks

Patrick Truesdale, Emerson Process Management

Didier Lambert, Topnir Systems s.a.s.

2015 / Shale

Careful blending of incoming feedstocks makes it possible to create an input stream to the refinery that is a better match than any crude source on its own
More

Emulsion breaker and metal removal technology increases FCC residuum

Kris Kohl, Paul White, Anibal Valle and Jim Trigg, GE Power & Water

2015 / Shale

Frequent and unexpected changes in crude blending properties result in operational and performance challenges from the desalter to the catalytic cracker
More

Stop gas leaks from compressor packings

Christian Hold and Tino Lindner-Silwester, Hoerbiger

2015 / Shale

A new piston rod sealing technology based on a pressurised oil barrier can eliminate a significant source of gas leaks from reciprocating compressors
More

Latin America shale oil: promise or pipedream?

Jefrey Zurlo, GE Water & Process Technologies

2016 / Shale

The challenges faced by Latin American refiners in processing fast emerging sources of shale oil in a low price environment
More

Novel processing ideas for a condensate refinery

Donald Eizenga, David Shecterle and Frank Zhu, UOP, a Honeywell Company

2016 / Shale

Synergised unit flow schemes for a condensate refinery aim for high value refined products
More

Monitoring against process problems

Tim Olsen, Emerson Process Management

2016 / Shale

Careful monitoring for preheat exchanger fouling and H2S release during unloading is vital when tight oil blends are processed
More

China's shale gas

Lee Fagg, Nexant

2016 / Shale

The outlook and opportunities for petrochemicals based on China's development of shale gas
More

Impact of light tight oils on distillate hydrotreater operation

Robert Ohmes and Matt Lehr, KBC Advanced Technologies

2016 / Shale

Addressing the range of challenges brought to diesel and jet production by light tight oil processing
More


Go Back