Browse Editions : 2016 / Q2
Title Author Edition
The outlook for transport fuels: Part 2

Gautam Kalghatgi, Saudi Aramco

Chris Gosling and Mary Jo Wier, UOP

2016 / Q2

As demand evolves, as specifications change, and as new fuel opportunities arise, what are the implications for refiners up to mid-century?
More

Energy saving chemical treatments in the crude distillation unit

Andrea Fina, Chimec

2016 / Q2

Chemical treatments allied to real-time energy monitoring deliver significant savings in CDU operations
More

The challenges of crude blending

Thomas Garrett, Patrick Christensen, William Vokovich and Thomas Yeung, Hydrocarbon Publishing Company

2016 / Q2

The second part of a two-part article details the importance of crude selection and blending strategies to prosper in a low cost yet volatile market.
More

Loss into gain in high capacity trays Part 1: excursion

Henry Kister, Fluor

Neasan O'Shea (ret'd) and Dan Cronin, Phillips 66 Whitegate refinery

2016 / Q2

Systematic troubleshooting diagnosed and solved two complex and independent problems that limited the capacity of an atmospheric crude distillation tower
More

Improved stripper efficiency raises upgrader production

Mike Goulding and Fred Zhang, Suncor

Michael Krela, Koch-Glitsch

2016 / Q2

Revamping a heavy oil upgrader's steam stripping tower increased tray efficiency and achieved record throughput
More

Enhancing fractionator efficiency

Soun Ho Lee, GTC Technology

2016 / Q2

Properly designed vapour and liquid distribution devices enable more effective distillation column efficiency
More

Increased margin from updated internals and catalyst

Fawzi Al-Somali, Saudi Aramco Shell Refinery Co

Edwin Maas, Shell Global Solutions International BV

Theo Visser, Criterion Catalysts & Technologies

2016 / Q2

A low cost hydrocracker revamp delivered extra value to a refinery by increasing diesel yield, cycle length and safety
More

How dynamic pressure can affect vacuum column readings

Grant Niccum and Steve White, Process Consulting Services

2016 / Q2

Computational fluid dynamics confirmed field measurements to explain a vacuum unit's poor quality HVGO and was used to redesign the tower internals
More

Energy savings in preheat trains with preflash

Chris Bealing, Juan Gomez-Prado and jim Sheldon, KBC Process Technology

2016 / Q2

An eastern European refinery combined pinch technology and process simulation to achieve the most cost effective energy savings
More

Addressing corrosion challenges in refineries

Kjell Wold, Emerson Process Management

2016 / Q2

Integrated corrosion management enables full control of refinery assets and opportunity crude processing without increased corrosion threats
More

Integrating capital work into turnarounds

Gordon Lawrence, Asset Performance Networks

2016 / Q2

If a turnaround is to be successful, project work must be well integrated with the turnaround's scope of work
More

Retooling APC for improved results

Randy Conley, Total Port Arthur refinery

Zak Friedman, Petrocontrol

2016 / Q2

Raising refinery-wide awareness of the role of advanced process control delivers maximum benefit from a reinvigorated APC
More

Removing contaminant fines from process water

Barry Perlmutter, BHS-Sonthofen

2016 / Q2

Careful analysis and a creative approach are required for the optimum application of filtration technology
More

Maximising propylene in the FCC unit

Michael Lutz, Harald Zeman, Thomas Krenn, Alexander Mittelmayr and Ignacio Beltran, OMV

Emmanuel Smaragdis, Matthias Scherer and Christophe Chau, Grace

2016 / Q2

Comparative trials with FCC catalyst formulations identified a winner on olefins selectivity and other factors
More

Remote sensing for process optimisation

Gregory Shahnovsky, Ariel Kigel and Ronny McMurray, Modcon-Systems

2016 / Q2

Remote sensing technology delivers process properties in hazardous areas in real time and in agreement with laboratory results
More


Go Back